"Pedal Jungle are the best, very friendly and helpful. Also quick to respond to messages, 10/10" - David Q.

Walrus Audio Iron Horse V3 Distortion FX Pedal

Worldwide Shipping
No-Fuss Returns
Earn Rewards
Free Shipping Over £100
100% Vegan

*This is a Special Order item that we order quickly and directly from our suppliers after your purchase and ship to you within 4-10 daysThis is...

*This is a Special Order item that we order quickly and directly from our suppliers after your purchase and ship to you within 4-10 days

This is V3 of the high-gain Distortion Iron Horse, which is Walrus Audio's take on a classic distortion circuit that’s thick and rowdy. Finely tune for clear overdrive or let off the reign's and let the true distortion commence!

*This is a Special Order item that we order quickly and directly from our suppliers after your purchase and ship to you within 4-10 days

The Details

Special Order Item
Expected to ship within 4-10 days
Effect: High-Gain Distortion
V3 of the best selling Iron Horse range
Clean overdrive to distortion onslaught
Silicon/LED knob
Top-mounted jacks
Soft relay true bypass on/off
Fixed volume drop-off when the distortion knob is at minimum
Re-imagined of the hard clipping toggle
Artwork by David Hüttner
Hand built in Oklahoma, USA
Lifetime manufacturer warranty to original buyer
Power requirements are 9VDC (10mA minimum).
The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.
Power supply not included

What Do Walrus Audio Say?

The Iron Horse is our take on a classic distortion circuit that’s thick, punchy, riffy, and rowdy. With the help of the Si/LED (Silicon/LED) knob and wide range of the distortion knob, this true bypass, high-gain behemoth can be finely tuned for clear overdriven sounds or let the reigns loose for a full-on distorted onslaught.

Top mount jacks with soft switch bypassing and art by David Hüttner complete the package for a pedal board-ready distortion machine.

Controls

With re-imagined hard clipping toggle as a blend style potentiometer, that allows you to blend between symmetrical silicon and diode clipping for a new variety of tones.

Owners of the previous versions of the Iron Horse will be familiar with the three distortion modes operated by a toggle switch to change between different clipping modes. The switch has now been replaced with a blending knob opening up a wealth of ways to alter your tone.

When the knob is set to the left, the distorted signal will be using Silicon clipping diodes adding in a high amount of compression. Rotating the knob to the right will bring in LED clipping and a smaller amount of compression. Putting the knob at noon will blend between the two using different ratios of the Silicone and LED clipping diodes for more complex clipping sounds.

Note: Since the Si/LED knob is changing the internal gain and clipping style, the other controls will behave slightly differently as well. You will need to use the volume knob to adjust the overall output up or down depending on where you have the knob set.

Shipping & Returns

Shipping