Fairfield Circuitry 20% More Slew Limiting Distortion FX Pedal
The 20% More Slew Limiting Distortion from Fairfield Circuitry is based explorations of a schematic found among old papers of mysterious origin.
These were suspiciously similar to a datasheet sq/tri oscillator, and Fairfield then proceeded to connect the dots to create the 20% More, which acts as a steep, somewhat distorted low pass filter, and a whole lot more.
The Details
- Effect: Distortion
- Made In Canada
- Current draw 20 mA max.
- 2 years manufacturers warranty
- 9.6 VDC
What Do Fairfield Circuitry Say?
SLEW LIMITER CORE
A slew limiter smoothes out how quickly incoming voltage can change, limiting it to a fixed v/sec. slope. since time and frequency are intrinsically linked, this acts as a steep, somewhat distorted low pass filter. When it resonates (FEED), these fixed slopes become triangle wave oscillations, giving 20% more its unique sound. Your input signal can overwhelm this oscillation, making for pseudo-wave folding and synthetic distortion artifacts. This topology can result in quite a dark sound when SLEW is low, as there will not be much harmonic content present beyond the cutoff frequency. You can use BLEND to mix in a square wave signal that can help bring back some higher harmonics.
LOW PASS GATE
20% More has a slightly resonant, 2 pole, 12dB/oct low pass filter at it's output. It offers a nice counterbalance to the grit of the slew limiter, and allows tasteful reigning in of the crackling potential present in the circuit.
ENVELOPE FOLLOWER
There is a simple internal envelope, its main purpose is to allow high feedback settings while avoiding (possibly unwanted) oscillations when no input is present. Both envelope destinations achieve this through different means. When the envelope goes to the LPG, it is a bit like a sidechain input, where your playing dynamics open up the filter and let highs pass through, giving some nice springy west coast bongos; the LPG knob needs to be set low for the gating to be effective. When the envelope goes to FEED, the average feedback is lowered slightly, loud playing will bring it back up. As loud inputs also fight the oscillations, interesting swashes of noise arise as your notes decay. Two flip-flop based clock dividers, giving sub-octave and sub≠ sub-octave effects. It is only heard when BLEND is up somewhat. The sub octave is summed through diodes, giving it a characteristic 75% pulse.
Play with INPUT. Interactions become intuitive.
FULL WAVE RECTIFIER
Envelope following requires a strictly positive input voltage. To achieve this, a full wave rectifier circuit is used. It is repurposed in the audio path as a switchable octave up. This particular implementation squishes very hard when INPUT is beyond noon. Enjoy.
Controls
INPUT 'mu amp' jfet preamp, lots of gain
BLEND mixes in a square wave/ sub-octave copy of the signal
VOLUME output volume, gets very loud
SLEW slew limiter frequency
FEED slew limiter feedback
LPG low pass filter
D- OCTAVE DOWN clock division of the blended square wave, -1 or -2 oct
U- OCTAVE UP analog octave up, full wave rectifier
E- ENVELOPE DESTINATION routing of the internal envelope, either added to the (L)PG or (F)EED controls
INTERNAL CONTROLS There are two user adjustable trimpots inside the pedal; they are labeled TR3 (drive) and TR2 (sens). The two other trimmers set the jfet bias and v/oct calibration, they should not be adjusted by the user.
DRIVE sets the amount of signal going into the JFET clipping stage, another20%more?
SENS(ITIVITY) Sets the gain of the internal envelope, allowing you to attenuate or exaggerate the response to your playing dynamics.
Shipping & Returns
Shipping
- Free UK RM48 shipping from orders of £100 or more
- Orders despatched within 1-2 working days
- Always tracked worldwide shipping
- Plastic free packaging as standard
Returns
30 day peace of mind return policy, but please read our terms and conditions, returns and refunds policy before placing an order.
