• Evidence Audio SIS DIY Solderless Right Angle Connector Black - Pedal Jungle
  • Evidence Audio SIS DIY Solderless Right Angle Connector Black - Pedal Jungle
  • Evidence Audio SIS DIY Solderless Right Angle Connector Black - Pedal Jungle
  • Evidence Audio SIS DIY Solderless Right Angle Connector Black - Pedal Jungle
  • Evidence Audio SIS DIY Solderless Right Angle Connector Black - Pedal Jungle
  • Evidence Audio SIS DIY Solderless Right Angle Connector Black - Pedal Jungle
"Pedal Jungle are the best, very friendly and helpful. Also quick to respond to messages, 10/10" - David Q.

Evidence Audio SIS DIY Solderless Right Angle Connector Black

Regular price
Out of stock
Added to Cart! View cart or continue shopping.
  • Worldwide Shipping
  • No-Fuss Returns
  • Earn Rewards
  • Free Shipping Over £100
  • 100% Vegan
Build your very own solderless patch cables with the SIS™ DIY system from Evidence Audio. Add exactly what you need to your new or current...

Build your very own solderless patch cables with the SIS™ DIY system from Evidence Audio.

Add exactly what you need to your new or current SIS™ setup with these right angle, screw in connector plugs with a graphite black finish, available here in single units.

The Details
  • Type: Solderless Connector
  • Made in the USA
  • DIY product
  • SIS™ system (Screw In Solderless)
  • Build your own pedal board connections
  • Screw in
  • Carefully machined threads
  • Super high quality component
  • Completely solderless
  • Easy assembly
  • Limited manufacturer warranty
What Do Evidence Audio Say?

The first and only Patented Solderless Patch cable system to legitimize the product category for both sound quality and reliability.

Tiny cable. Huge sound.

There’s no need to compromise your sound when space requires a small diameter cable. In this case, 0.155 inches.

The Monorail is the “go-to” cable for people who want a cable that gets out of the way sonically and physically. Equipment builders, rack builders and pedalboard builders.

Monorail cable features our Proprietary high-purity IGL copper conductors for distortion-free midrange and high frequencies. The solid-core center conductor eliminates the negative effects of strand interaction on the audio signal, plus a 20 awg conductor size keeps skin-effect distortions outside the audio spectrum while offering ample cross-sectional area.

The perfect combination of Monorail sound quality, the convenience to build and rebuild without solder, a compact cable and plug combination, and no signal failures in the middle of a song!

Evidence Audio also introduces the perfect 1/4″ Phone plug for use with its award-winning Monorail signal cable.

As used by David Gilmour, Noel Gallagher, Graham Coxton, Ed O’Brien of Radiohead, Josh Smith, Guthrie Govan, Andy Timmons, Guy Pratt, Steven Rothery, and many others.

SIS™ Setup Details

CONNECTORS

The inside of the tip of the SIS™ plug is carefully machined to have “threads” of a precise size and pitch. These threads cut and re-shape the soft conductor of the Monorail cable when turned around it several times.

When you push the prepared cable into the SIS plug, the soft copper will find the hole. When you turn the plug 1 or 2 times the harder brass core of the plug will catch and cut into the copper conductor. When you feel this happen you put the cap in place and screw the SIS plug into the cap.

This action turns the soft copper deeper into the SIS core – Mashes the ground up against the SIS body to make ground contact (airtight as the copper is deformed inside pushing air from the connection). This seals the red jacket at the exit tightly so that the cable will not come loose from the plug and the cap will not come loose from the plug body. When finished the tip/core connection with the Monorail is also air-tight and in many ways better than a soldered connection. If you unscrew the SIS plug and remove the Monorail cable you can see the soft copper has been shaped to meet with the SIS core.

ASSEMBLY INSTRUCTIONS

1) REMOVE the thin black (conductive) skin from around the white insulation. If it touches where the conductor needs to enter, you’ll create a complete short or partial short with weak signal.

2) Do not cut up your cable into short pieces before attaching the plugs. Instead attach the first plug to your long/entire supply of cable. Measure the length required to the other plug. Cut and attach the second plug to complete your cable. Rinse, repeat.

3) Wear rubber gloves to get a good grip and spare sore fingers when closing tight.

4) Push the cable into the plug and when you seat the core, rotate the plug about 10-12 full revolutions (straight plug only). This will simultaneously thread the copper core into the tip of the plug and screw the body of the plug onto the cable jacket. You only need the jacket to enter the plug a few millimeters.

Shipping & Returns

Shipping

  • Free UK RM48 shipping from orders of £100 or more
  • Orders despatched within 1-2 working days
  • Always tracked worldwide shipping
  • Plastic free packaging as standard

Returns

30 day peace of mind return policy, but please read our terms and conditions, returns and refunds policy before placing an order. 

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
S
Seven
Brilliant connectors for custom cabling

Great product especially for custom cables . Really easy to use and really secure connections. Don't be put off by people saying everything should be soldered. These have threads that cut into the core and the earth is secured by the friction. Highly recommended, I've used these for years and never had any issues whatsoever.

Hi Simon. Awesome review, thanks for taking the time to provide it, and many thanks for your purchase. Cheers, Paul.

S
Steve Dennis
Evolution Audio SIS Cables and Plugs

Having been a diehard 'solder you own cables' paerson for many years I though I'd try out Evolution's SIS patch cable making system. The advantage of this system is the low profile of the plugs and narrow cable gauge which translates to neater pedal board wiring. Pedal these days often have ,any more oockets than before and casing sizes are reducing. Somethine even compact 1/4 plugs are not suitable especially when near the 9v DC input.

As a former engineer I'm impressed with the SIS system where the cable, if properly prepared and by following Evolution's instructions to the letter, the cable is screwed ever deeper into the core of the jack plug and cannot be pulled out. I was sceptical but all my connections worked first time with no need to repeat the assembly job. So, far so good - no signal problems at all!

Hi Steve. Thanks so much for the purchase and the review. So glad you're happy with the SIS system. Thanks, Paul.